Dell DL1300 Owner's Manual page 93

Figure 34. Removing and Installing the four 3.5-inch hot swappable SAS hard drive backplane
1. guide (2)
3. release tab (2)
5. backplane signal cable
7. hard drive connector (4)
Next steps
1. Install the hard drive backplane.
2. Follow the procedure listed in After working inside your system section.
Related Links
Before working inside your system
After working inside your system
Installing the hard drive backplane
Safety instructions
2. hard drive backplane
4. backplane power cable
6. SAS_A connector on the backplane
93