Installing The Lcd Control Panel Assembly - Dell DL1300 Owner's Manual

Figure 36. Removing and installing the LCD control panel board—four hard drive chassis
1. screw (2)
3. display module cable
5. USB connector cable
Next steps
1. Install the LCD control panel assembly.
2. Follow the procedure listed in the After working inside your system section.
Related Links

Installing the LCD control panel assembly

Before working inside your system
After working inside your system
Safety instructions
Installing the LCD control panel assembly
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver ready.
96
2. control panel connector cable
4. LCD control panel board
6. standoff on the chassis (2)