OSEE MVM230 User Manual page 22

Sub Menu
USER CONFIG
BACKLIGHT
LANGUAGE
PHASE (NTSC only)
APPERTURE
F1 BUTTON
F2 BUTTON
LOCK NUMBER
(6) OSD CONFIG
 PAGE 1：OSD DISPLAY
MVM230 Quad Split LCD Monitor
Settings Explanation
13 Adjusts the backlight
<0 ... 30>
ENGLISH <ENGLISH>: English
<中文>: Chinese
50 <0 ... 100>
20 <0 ... 63>
MARKER <MARKER>: Control all MARKERS. ON-OFF
<AUD METER>: Control all audio meter display,
ON-OFF
<WAVEFORM>: ON-OFF
<H/V DELAY>: OFF-H-V-H/V
<NATIVE>: ON-OFF
<BLUE ONLY>: ON-OFF
<MONO>: ON-OFF
<ASPECT>:For SD Signal,16:9-4:3 adjust
<SCAN>:NORMAL-OVER
<NONE>: no settings
SCAN <MARKER>: Control all MARKERS. ON-OFF
<AUD METER>: Control all audio meter display,
ON-OFF
<WAVEFORM>: ON-OFF
<H/V DELAY>: OFF-H-V-H/V
<NATIVE>: ON-OFF
<BLUE ONLY>: ON-OFF
<MONO>: ON-OFF
<ASPECT>:For SD Signal,16:9-4:3 adjust
<SCAN>:NORMAL-OVER
<NONE>: no settings
- Function lock code input, 8 characters. Each character
can input number or letter.
Note: Be careful to adjust this option to avoid
unnecessary mistakes.
—20—
User Manual