Section 4: Lathe Operations; Operation Safety - Grizzly G9729 Instruction Manual

SECTION 4: LATHE OPERATIONS

Operation Safety

Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
G9729 Combination Lathe/Mill
Control Panel
It is vital that you become familiar with the control
panel before operating the Model G9729.
Power to the two motors is controlled through a
series of switches mounted on the Lower and
Upper Belt Guards in Figure 9. Please examine
the layout before running the lathe/mill.
Note—The lathe spindle and drill spindle cannot
be used simultaneously.
Figure 9. Control panel components.
-19-