Rointe SYGMA Instruction Manual page 12

SYGMA
3.7. Menu / Programming function
Pressing
directly:
1. Select the COMFORT temperature setting (55ºC to 73ºC), using
and
2. Press
54.5ºC) using
will flash.
3. After pressing the button
will start flashing and show as DAY1, DAY2, DAY3.... We can go
forwards and backwards using the button
to select the day or days that we wish to program.
4. Pressing
change the hours use the
will show as 0h, 1h, 2h,... By pressing the
select the mode required hour by hour: COMFORT, ECO or OFF.
5. To finish the programming, press
without pressing any buttons.
3.8. Screen brightness function
You can change the brightness of the screen by pushing the
button for 3 seconds when the product is in manual mode. Entering
this mode you will see the following screen:
12
for 3 seconds allows you to program the water heater
. The symbol
and we can select the ECO temperature (40ºC to
and . The symbol
takes us to the hours we wish to program. To
and the temperature will flash.
and the temperature
once again, the days of the week
or buttons. The hours selected
or leave it for 30 seconds
and . Press
button, we can