Table of Contents
Advertisement
2—Optional Tau Accessories
2.2
Backward-compatible Photon accessories
The following are accessories that offer a development environment or extended features for
your Tau camera.
1
1. Cable, Tau to I/O Module, 6 foot length
(Part Number: 308-0076-02)
2. Input/Output (I/O) Module (Part Number: 333-0018-00)
3. AC/DC Power Supply (Part Number: 206-0001-20)
4. IEC Line Cord (Part Number: 208-0004-02)
5. Photon Replicator Board (Part Number: 250-0324-00)
6. Board Spacer (Part Number: 261-1477-00)
7. Wearsaver (Part Number: 250-0194-00) Not Shown
The Photon Replicator kit includes a power supply, input/output module (interconnect box),
Photon Replicator Board (26-pin to 50-pin adapter to Tau allowing use of existing Photon cables
and accessories), and cables to facilitate AC power in and analog video out for your Tau
camera. With this accessory kit, the customer only needs to purchase a standard RS-232
COM cable in order to perform advanced configuration using the free downloadable FLIR
Camera Controller. Longer screws are required to mount the replicator board to the Tau core.
1. Photon Replicator Board accepts 6-24V. (The Tau core input voltage is 4-6V without the replicator
attached.)
2-2
2
3
5
6
Figure 2-2: Photon Replicator Kit
April 2009
Tau User's Manual
4
1
TAU-0035-00-10, version 100
Advertisement
Table of Contents
