GE Masoneilan SVI II AP Instruction Manual page 9

7. Click Settings > Field Networks, click Add and Figure 4 appears. Select HART Modem and
click OK.
8. Click OK again to add the HART Modem to Network View and Figure 5 appears.
9. Ensure the Serial Interface pulldown and the Address scan fields are correct. Click Apply
and then OK.
NOTE
© 2016 General Electric Company. All rights reserved.
Figure 4 Add Field Network
Figure 5 HART Modem Configuration Tab
If device is connected (or powered through DCS), set Master to
Secondary Master.
Masoneilan SVI II AP Bench Quick Start Manual
| 9
=