GE Masoneilan SVI II AP Instruction Manual page 12

If not it does not connect:
Right-click on the device in the topology pane, select Additional Functions >
Communication and Figure 8 appears. Correct the Polling Address and click Apply.
Disconnect and then reconnect.
14. Click Upload All Parameters icon (see red box in Figure 7).
NOTE
12 |
=GE Oil & Gas
Figure 8 Communication Tab
Upload means to pull data from the SVI II AP and load data into
DTM onto the PC. Download puts data from the DTM into the SVI II
AP.
© 2016 General Electric Company. All rights reserved.