GE Masoneilan SVI II AP Instruction Manual page 10

10. Right-click on the HART Modem and do one of the following:
Selecting Network > Rebuild Network.
or
Selecting Find New Devices.
or
Clicking Add New Device, Figure 6 appears, highlighting SVI II AP HART 5, 6 or 7 and
clicking OK.
11. Right-click on the SVI II AP in the Project pane and click Connect.
12. Click OK to the DTM evaluation period warning, if it appears. The SVI II AP DTM opens.
If the SVI II AP DTM doesn't open automatically: Select the SVI II AP device you added,
right-click and select Online Parameter.
10 |
=GE Oil & Gas
Figure 6 Add New Device
© 2016 General Electric Company. All rights reserved.