Table of Contents
Advertisement
TrainMaster Command Control operations
CAB-1 Remote Controller numeric keypad commands
W
hen you press the AUX1 button on your CAB-1 Remote Controller, you turn the numeric
keypad into ten command buttons. These commands are specific to your locomotive, and
an overlay is included to help you learn these functions. After you press the AUX1 button, you
will be able to press any numbered button until you address a different Command Control
equipped product. The corresponding RailSounds sound system effects are in
bold italic type.
Stops and resets the locomotive. Resets the locomotive's direction to forward. Horn
blows. RPM sounds return to automatic.
Raises the volume of the RailSounds sound system background sounds, such as RPM
sounds and let-off sounds. The horn, bell and dialog are unaffected. The default is full
volume. The volume setting is retained when track power is turned off. Sound volume
increases.
Engineer begins radio dialog, dispatcher replies (see pages 15 and 16). CrewTalk
communication.
Enters manual RPM mode and increases the RailSounds sound system RPM level (see
page 20).
Lowers the volume of the RailSounds sound system background sounds, such as RPM
sounds and let-off sounds. The horn, bell, and dialog are unaffected. The volume setting is
retained when track power is turned off. Sound volume decreases.
Activates the RailSounds sound system shutdown sequence.
Enters manual RPM mode and lowers the RailSounds electric motor RPM level (see page 20).
Dispatcher begins radio dialog, engineer replies (see pages 15 and 16). TowerCom
announcement.
Electrical arc sound.
Air release sound.
19
Advertisement
Table of Contents
