Part 5 Specifications - Omega iSD-TH User Manual

PART 5
SPecIFIcATIoNS
SeNSoR SPecIFIcATIoNS
Relative Humidity (RH)
Accuracy/Range:
Hysteresis:
Non-linearity:
Response Time:
Repeatability:
Resolution:
Temperature (T)
Accuracy/Range*:
Wand Probe:
Industrial Probe:
Response Time:
Repeatability:
Resolution:
PRoBe SPecIFIcATIoNS
Standard Probe:
Industrial Probe:
±2% for 10 to 90%;
±3% for 5 to 10% and 90 to 95%
±4% for 0 to 5% and 95 to 100%
Refer to chart in Appendix J
±1% RH
±3%
8 seconds, tau 63% (time for reaching 63% of a step
function, valid at 25C and 1m/s airflow)
±0.1%
0.1%, 12bit
NOTE: Reconditioning of the probe may be necessary if
the probe is stored for a period of time in a harsh
environment (temperatures below 0°C or above 70°C or
exposure to chemical vapors, condensation, etc).
To recondition the probe refer to Appendix J.4
±0.5°C for 5° to 45°C (±1°F for 41° to 113°F);
Up to ±1°C for 0° to 5°C and 45° to 60°C
Up to ±2°F for 32° to 41°F and 113° to 140°F)
Refer to chart in Appendix J
±0.5°C for 5° to 45°C ( ±1°F for 41 to 113°F);
±1.5°C for -40° to 5°C and 45° to 12
Up to
±2.7°F for
Up to -40° to 41°F and 113° to 255°F)
Refer to chart in Appendix J
*Note: extended temperature range is for Industrial Probe
only, the iServer's operating temperature is 0 to 60°C
5 to 30 seconds, tau 63% (response time depends on heat
capacity of and thermal resistance to sensor substrate)
±0.1°C
0.1°C, 14 bit
83.8 mm long x 13 mm diameter (3.3" x 0.5")
137mm long x 16mm diameter (5" x 0.63")
Cable with mini DIN connector: 3m long (10')
Cable operating temperature: -40 to 125°C (-40 to 257°F)
55
4°C