Table of Contents
Advertisement
4.4.3.1 Data and Time (continued)
Date and Time
Address
http://192.168.1.200
Readings
Date and Time
Overview
Network
Configuration
Management
Security
Recording
System
Diagnostics
Log Out
Once the AC adaptor is disconnected from the iServer and there is no battery
back-up, the iServer will lose its date and time settings.
Once the iServer is rebooted from any web page, the iServer will lose its date
and time settings whether or not the back-up battery is installed.
If the iServer is setup to get it's time from a Network Time Server, then the time
will be re-assigned after the reboot.
Network Time Server – If there is a time server on the network or the Internet, the
iServer will get the real date and time once the Network Time Server's IP address is
provided. Default is unchecked.
NTS Address – The field to enter the Network Time Server's IP address.
The U.S. National Institute of Standards and Technology (NIST) publishes a list of time
servers on the Internet used by the NIST Internet Time Service (ITS). The list includes
each server's name, IP address, and location in the United States. As of the publication
date of this manual, links to the list can be found at http://tf.nist.gov.
Time Zone – If Network Time Server option is checked, the correct time zone must be
selected for the correct time display.
Web Link
Server
Sensors
Date and Time
Current Date
Current Time
Change Date and Time
Time Server
Network Time Server
NTS Address
Time Zone
Save Changes
Figure 4.15 Configuration: Date and Time
Setup
Contact Closures
Alarm Relays
2099/01/01
00:00:00
(GMT-08:00)Pacific Time(US&Canada)
Cancel
24
(yyyy/mm/dd)
Advertisement
Table of Contents
