Table of Contents
Advertisement
7
Software
7.1
System Requirements
To install the "EasyWeather" software onto your PC, the minimum requirements are as follows:
Operating System: Windows NT4 (Service Pack >= 6a), Windows 2000, Windows XP, Windows Vista.
Internet Explorer 6.0 or above
Processor: Pentium III 500 MHz or above
Memory: at least 128MB, 256MB recommended
CD-ROM Drive
Base Station and PC must be connected by USB cable
7.2
Installation of the "EasyWeather" Software
The Base Station and the Outdoor Sensors must be connected and checked for correct function (see
Setup).
After successfully checking proper function of the weather station, install the "EasyWeather" software as
follows:
1. Switch on your PC and insert the CD-ROM into the CD-ROM Drive.
2. Double click "Setup.exe"
3. Select the language and click next
4. Click next and select the storage location
5. Click next to install the programme
6. Press ok to finish the installation process
7. The programme is to be found under "Start—All Programs—EasyWeather"
Note: The user should be aware, that to fully access the graphic functions, they need to have
administrative rights for the computer.
7.3
Basic Settings of the PC Software
After the start-up of "EasyWeather.exe" programme, the following window will appear on the PC screen:
The settings from the base unit are transferred to the PC software. Once the settings of the base unit
have been completed, then no other setting changes need to be made on the PC software. However it is
easy to change the settings on the PC software and transfer these to the base station. (The settings will
be updated on the base station in the next full minute)
Manual
18
- Quick Links:
- Setup
Hide quick links:
Advertisement
Table of Contents
