Specifying Replication Event Ids - Buffalo TeraStation WSS HR WSH5000N2 Series User Manual

Items
Send to
SMTP Server
Authentication
SSL/TLS
Title
Contents
Test Message

Specifying Replication Event IDs

If you select "Specify event ID" in the email notification settings, a notification email will be sent when the specified
event occurs. If using Buffalo Replication, enabling this function is recommended.
1
From the Windows Storage Server Start menu, click Email Notification.
2
Select the "Specify event ID" check box.
3
Click New.
4
Select "Application from the "Log Type" list.
5
Enter "Replication" into the "Source" box.
6
Enter an event ID referring to the table below.
It is recommended to configure for all communication error events.
• Event IDs of Communication Errors
Event ID Type
1000 Error
Adds a new receiver for the notification email. Click New to add a new
email address. Click Edit to change the receiver settings or Delete to
remove an address from the list.
Note: Up to five email addresses may be added.
Enter your email SMTP server's address and port number. Port
number 25 is configured by default.
Note: If you choose "None" or "POP before SMTP" for the user
authorization, the port number is locked to "25".
Select the user authorization type from "None", "POP before SMTP",
"LOGIN (SMTP-AUTH/LOGIN)", and "CRAMMD5 (SMTP-AUTH/CRAM-
MD5)". If "POP before SMTP" is selected, enter the POP server address,
port number, username, and password. Unless specified otherwise,
the standard port number (110) is used.
If "LOGIN (SMTP-AUTH/LOGIN)" or "CRAMMD5 (SMTP-AUTH/CRAM-
MD5)" is selected, select whether to use SSL or TLS.
Enter the subject of the notification email.
Email server address: Select the "IPv6" check box to add IPv6
compatibility to the email notifications.
Select the event that will trigger the notification emails to be sent.
Status report: Sends regular notification emails at the specified time.
Disk error: Sends an email when a hard drive error occurs.
At boot: Sends an email when the system is booted or restarted.
Fan failure: Sends an email when a fan error occurs.
Backup error: Sends an email when a backup error occurs.
Replication error: Sends an email when a replication error occurs.
Temperature error: Sends an email when the TeraStation
temperature exceeds normal levels.
Specify event ID: Sends an email when the specified event IDs are
logged. Enter an event ID to trigger email notifications.
Sends a test email to the email address which is configured.
Description
Replication source folder not found.
76
Descriptions