Buffalo TeraStation WSS HR WSH5000N2 Series User Manual page 87

8
Insert the new drive into the empty slots, slide the drive in with the locking mechanism open, and swing the
lock back down until it clicks into the place.
1
9
The "RAID-6 RECOVERING 0%" message will be displayed on the LCD panel after 3 minutes.
RAID-6
RECOVERING 0%
10
When "RAID-6 ONE DRIVE DOWN" is displayed, replacement for a defective drive is finished.
RAID-6
ONE DRIVE DOWN
11
Push the rest of the failed drive's unlock button and swing the locking mechanism out.
12
Insert the new drive into the empty slot, slide the drive in with the the locking mechanism open, and swing
the lock back down until it clicks into the place.
13
Close the front cover with the key.
2
86