Replication - Buffalo TeraStation Setup Manual

Replication

Replication will mirror data on your TeraStation to a second TeraStation. An exact duplicate of a data share on the first
TeraStation is copied to the second TeraStation virtually simultaneously. To configure Replication, use an Ethernet cable
to connect LAN port 2 on the first TeraStation to LAN port 2 on the second TeraStation. The first TeraStation should be
connected to the local Network by LAN port 1. Configure replication as described below.
1
2
Click [Add].
3
4
Read the alert message carefully and click [OK].
Replication configuration is complete.
TeraStation Setup Manual
Click [System] - [Backup] - [Replication] on the TeraStation Web Admin.
1 Select replication source folder.
2 Select replication target folder.
3 Click [Save].
46