Buffalo Replication - Buffalo TeraStation WSS HR WSH5000N2 Series User Manual

• Up to five replication tasks can be created.
• Filenames and file paths that will be copied by replication should be within 170 characters. Files with filenames
that are longer than 170 characters may not be copied correctly.

Buffalo Replication

If using Buffalo Windows Storage Server-installed TeraStations as both the replication source and target, start from
step 1. If using a different TeraStation as the replication target, refer to that TeraStation's user manual to configure it
as a replication target. After you finish configuring on the TeraStation's Settings, go to step 3.
1
Click TeraStation Backup & Replication Folder Settings in the Start menu on the replication target TeraStation's
Windows Storage Server.
2
Double-click the blank space under "Label" and enter a label for the folder. Click
the folder as a replication target. Click OK when finished.
3
Click Buffalo Replication in the Start menu on the replication source TeraStation's Windows Storage Server.
4
Click the blank space under "Replication Source" and click
source and click OK.
. Select a folder from the list for replication
36
under "Folder" and select