Engine (Ignition) Switch (Vehicles With A Smart Entry & Start System) - Toyota AYGO Manual

154
4-2. Driving procedures
Engine (ignition) switch (vehicles with a
smart entry & start system)
Performing the following operations when carrying the elec-
tronic key on your person starts the engine or changes engine
switch modes.
Starting the engine
Multi-mode manual transmission
1
Check that the parking brake is set.
2
Firmly depress the brake pedal, press the engine switch once and
shift the shift lever to N. (→P. 159)
The smart entry & start system indicator light (green) will turn on. If the
indicator light does not turn on, the engine cannot be started.
3
Press the engine switch.
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal until the engine is completely
started.
The engine can be started from
any engine switch mode.
AYGO_EE_OM99J92E