Changing The Passkey; Setting Automatic Connection Of The Device On Or Off; Displaying The Device Status; Setting The Automatic Connection Confirmation Display To On Or Off - Toyota AYGO Manual

Changing the passkey

1
Select "Passkey" using the "MENU" knob.
2
Select a 4 to 8-digit passkey using the knob.
Input the number 1 digit at a time.
3
When the entire number to be registered as a passkey has been
input, press
If the passkey to be registered has 8 digits, pressing
necessary.

Setting automatic connection of the device on or off

If "BT power" is set to on, the registered device will be connected
automatically when the engine switch is turned to the "ACC" position
(vehicles without a smart entry & start system) or ACCESSORY mode
(vehicles with a smart entry & start system).
1
Select "BT power" using the "MENU" knob.
2 Select "On" or "Off" using the knob.

Displaying the device status

Select "Bluetooth
● Displaying the device name
Select "Device name" using the "MENU" knob.
● Displaying the device address
Select "Device address" using the "MENU" knob.
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Setting the automatic connection confirmation display to on or off

If the "Display setting" is set to on, the portable player connection sta-
tus will be displayed when the engine switch is turned to the "ACC" or
"ON" position (vehicles without a smart entry & start system) or
ACCESSORY or IGNITION ON mode (vehicles with a smart entry &
start system).
1
Select "Display setting" using the "MENU" knob.
2
Select "On" or "Off" using the knob.
AYGO_EE_OM99J92E
(Enter).
*
info" using the "MENU" knob.
5-6. "SETUP" menu
(Enter) is not
237
5