Toyota AYGO Manual page 55

● Other child restraint systems different from the systems mentioned
in the table can be used, but the suitability of the systems must be
carefully checked with the child restraint system manufacturer and
retailer.
■
When installing a child restraint system on the front passenger seat
When you have to use a child restraint system on the front passenger seat,
adjust the following:
●
The seatback to the most upright posi-
tion
If the child restraint system interferes
with the seatback when latching the
child restraint system into the support
base, adjust the seatback rearward until
there is no interference.
● Move the seat as far back as possible.
If the CRS cannot be installed properly, due to hitting part of the vehicle
interior and so forth, adjust the position of the front seat and its seatback
angle.
If the seat belt shoulder anchor is ahead
of the child seat belt guide, move the
seat cushion forward.
■ Selecting an appropriate child restraint system
●
Use a child restraint system appropriate for the child until the child becomes
large enough to properly wear the vehicle's seat belt.
●
If the child is too large for a child restraint system, sit the child on a rear seat
and use the vehicle's seat belt. (→P. 30)
AYGO_EE_OM99J92E
1-1. For safe use
55
1