Toyota AYGO Manual page 86

86
2. Instrument cluster
Stop & Start system operation time (if equipped)
■
● Displays the amount of time the engine was stopped due to oper-
ation of the Stop & Start system during the current trip.
Vehicles without a smart entry & start system: From the engine switch in
the "ON" position to the engine switch in the "LOCK" position.
Vehicles with a smart entry & start system: From the engine switch in
IGNITION ON mode to the engine switch off.
● When the Stop & Start system is operating, the presently dis-
played screen is interrupted and the Stop & Start system opera-
tion time automatically displayed.
• Push one of the "DISP" buttons to return to the previous screen.
• The automatically displayed function of the Stop & Start system oper-
ation time activated or deactivated switch over method. (→P. 87)
Stop & Start system total operation time (if equipped)
■
Displays the total amount of time that the engine has been stopped
due to operation of the Stop & Start system since the system was
last reset.
Push and hold one of the "DISP" buttons to reset.
Outside temperature (except manual transmission vehicles
■
with a 1KR engine)
Displays the outside temperature.
Current fuel consumption
■
Displays the current rate of fuel consumption.
Average fuel consumption
■
Displays the average fuel consumption since the function was
reset.
• The function can be reset by pushing one of the "DISP" buttons for
longer than 1 second when the average fuel consumption is displayed.
• Use the displayed average fuel consumption as a reference.
AYGO_EE_OM99J92E