Table of Contents
Advertisement
CLEANING AND MAINTENANCE
Do NOT use alcohol, solvents, polishes, or any oily substance on oxygen
equipment. if cleaning is necessary, use only warm water and a mild dish
washing detergent. Dampen a cloth in the detergent and water solution
and wipe the outside surface of the equipment until clean.
Do not allow water into any of the controls, the fill
connector, or the oxygen supply connector.
Never attempt to repair or disassemble this
equipment. You could create a hazardous condition
or cause equipment failure. If you have problems,
questions, or are unsure if equipment is operating
properly, call your liquid oxygen system supplier.
Never apply cleaning agents or disinfectants to the
contents indicator. These agents attack the plastic,
which can result in leaking or cracking of the
indicator. Use only a cloth dampened with water to
clean the indicator as needed.
B-701417-00 Rev D
23
Advertisement
Table of Contents
