Table of Contents
Advertisement
COMPANION PORTABLE UNITS
C1000/C1000 Transport Unit Components
Become familiar with the various parts of the unit described below and
shown in Figure 8 and Figure 9.
•
Vent Valve: used to fill the unit. Pull down the vent valve lever to
fill the Portable when it is connected to a Stationary unit. Return
the vent valve lever to its original position to stop the fill.
•
Fill Connector: used to connect to a Stationary unit. The female
fill connector is located on the bottom of the Portable.
Figure 8: C1000/C1000 Transport Portable Unit
See Figure 9 for the following items:
•
Flow Control Knob: used to set the correct oxygen flow to your
prescribed rate.
B-701417-00 Rev D
Components
11
Advertisement
Table of Contents
