Test Mode 5.3 - Partlow MIC 2000 Installation And Operation Manual

P 48
AGE
K e y
Actual Display
On/Off Display -
ON
Use arrow keys
OFF
to turn on or off
Scroll Key
Numeric Display -
Use arrow keys
to change value
Up Arrow Key
Down Arrow

Test Mode 5.3

The Test mode can be entered, if enabled, by pressing and releasing the SCROLL key until
tESt is displayed. Press the DOWN key and tSt1 will be displayed. This test can be initiated
at this time or press the SCROLL key to advance to the desired test. Test 1, 2 and 3 are
performed as a block so the display will advance from tSt1 to tSt4.
All available test procedures are listed in TABLE 5-2 (page 49). Test 1, 2, and 3 are per-
formed on start up, periodically during Control, and on entry into the Test mode. Test 4 is
executed on entry into and periodically during the Control mode. These tests can be used as
trouble-shooting aids.
TEST MODE FLOW CHART
tESt
tSt1
tSt4
tSt5
tSt6
tSt7
tSt8
tSt9
tStA