Modifying Management Applications - D-Link DGE-560SX User Manual

NOTES:
The hexidecimal number above may differ from your current installer. Check
o
the Key name corresponding with the Broadcom Advanced Control Suite
(BACS) application in
HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall for the correct
hexidecimal number.
After performing a silent uninstall, it is necessary to reboot the system before
o
reinstalling this installer. If a reboot is not performed, BASP will not install
correctly.
To perform a silent install by feature on IA32 platforms
Use ADDSOURCE to include any of the features listed below.
NOTE: CHM32 or CHM64 installs the BACS help file and must be included when installing
the BACS feature.
setup /s /v"/qn ADDSOURCE=BACSi32,CHM32,BASPi32,SNMPi32,CIMi32"
To perform a silent install by feature on AMD64/EM64T platforms
Type the following:
setup /s /v"/qn ADDSOURCE=BACSa64,CHMa64,BASPa64,SNMPa64"
To perform a silent install from within a batch file
To perform a silent install from within a batch file and wait for the install to complete before
continuing with the next command line, type the following:
start /wait setup /s /w /v/qn

4.2 Modifying Management Applications

To modify the management applications
1. In Control Panel, double-click Add or Remove Programs.
2. Click Broadcom Management Programs and then click Change.
3. Click Next to continue.
D-Link DGE-560SX User Guide
79