Safety Precautions; Preinstallation Checklist - D-Link DGE-560SX User Manual

testing has been done on some of these machines. The Makefile may have to be modified to
include architecture-specific compile switches, and some minor changes in the source files
may also be required. On these machines, patching the driver into the kernel is
recommended.

2.2 Safety Precautions

CAUTION! The adapter is being installed in a system that operates with voltages
that can be lethal. Before you remove the cover of your system, you must observe
the following precautions to protect yourself and to prevent damage to the system
components:
Remove any metallic objects or jewelry from your hands and wrists.
o
Make sure to use only insulated or nonconducting tools.
o
Verify that the system is powered OFF and unplugged before you touch
o
internal components.
Install or remove adapters in a static-free environment. The use of a properly
o
grounded wrist strap or other personal antistatic devices and an antistatic
mat is strongly recommended.

2.3 Preinstallation Checklist

1. Verify that your server meets the hardware and software requirements listed under
System Requirements.
2. Verify that your server is using the latest BIOS.
NOTE: If you acquired the adapter software on a floppy disk or from the Broadcom
support website
(http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php), verify the
path to the adapter driver files.
3. If your system is active, shut it down.
4. When system shutdown is complete, turn off the power and unplug the power cord.
5. Holding the adapter card by the edges, remove it from its shipping package and place
it on an antistatic surface.
D-Link DGE-560SX User Guide
18