3.6.3 SNMP Agent
This SNMP agent is designed to support the configuration information pertaining to the
Broadcom BASP driver for NetWare.
Installation
When the BASP.LDI driver is installed using nwconfig or nwinstall, the driver automatically
copies the BASP.LAN, bmapi.nlm, and bsnmp.nlm files to the system.
After you configure and run the BASP and bind the BASP to network adapters, load the
Broadcom SNMP Instrumentation Agent (BSNMP) as follows:
From the NetWare Server console command line interface, type:
load bmapi.nlm
load bsnmp.nlm
SNMP Objects
BASP SNMP objects are provided in the BASP-Config.MIB file, which is on your installation CD.
The snmpget and snmpgetnext commands can be used to receive the BASP SNMP objects
such as:
snmpget localhost public BASP-Config-MIB::btTeamNumber
snmpgetnext localhost public BASP-Config-MIB::btTeamNumber
NOTE: Only BASP configuration information is available through SNMP in NetWare.
Statistical events are only available for the base adapters
Files
BASP.LAN
bmapi.nlm
bsnmp.nlm
BASP-CONFIG.MIB
3.7 Windows Driver Software
3.7.1 Installing the Driver Software
D-Link DGE-560SX User Guide
71