Setting Power Management Options - D-Link DGE-560SX User Manual

To view or change the properties of the D-Link NetXtreme 5718 Gigabit Ethernet
Controller
1. Right-click the Control Suite icon in the taskbar notification area, and then click
Launch BACS.
2. Click the Advanced tab.
3. See Setting Adapter Properties for a detailed description of the available properties
as well as for instructions for viewing and changing the value of a particular property.
NOTE: You can also open Broadcom Advanced Control Suite in Control Panel.

3.7.4 Setting Power Management Options

You can set Power Management options to allow the operating system to turn off the adapter
to save power. If the device is busy doing something (servicing a call, for example) however,
the operating system will not shut down the device. The operating system attempts to shut
down every possible device only when the system attempts to go into hibernation. To have
the adapter stay on at all times, do not select the Allow the computer to turn off the
device to save power check box.
D-Link DGE-560SX User Guide
75