Zeroing The Scale - BIS ASGPP User Manual

6.2 ZEROING THE SCALE

When there is no item on the scale but reading is not zero, press the ZERO key to turn on ZERO indicator. If the
weight is greater than the programmed percentage (see F7 step, section 7) in respect to the capacity, the zeroing
will have no effect.
6.3 TARE FUNCTION
Put container on the platter, once the weight reading is stable, press the TARE key, the TARE indicator will be on
and the container's weight will be deducted. When it is time to clear the TARE, take off the container, and press
TARE key again.
6.3.1 LIMITATION OF THE TARE FUNCTIONS
It is possible to limit the tare functions, selecting "oFF" in the F8 step of the set-up environment (see section 7)
The SEMI AUTOMATIC TARE could be made only if the tare is equal to 0.
NOTE: With approved instrument, the F8 step is not settable.
6.4 OVERLOAD WARNING
Please do not add item that is over the maximum capacity. When reading "—OL—" and hear beeping sound,
remove the item on the platter to avoid damage to the load cell.
6.5 CHANGE PRICE UNIT
You can use the U key to change unit. Press U key will change the weighing unit circularly, and the pertinent
indicator will on.
NOTE: at start-up the scale suggests automatically the main price unit set in the set-up (see F2 step, section 7).
6.6 UNIT PRICE SETTING
To trade with your scale, it is necessary to setting a unit price of the goods, the scale then uses this unit price to
determine how much that goods are on the platter. When the scale is displaying the weight of the goods placed on
the scale, set the unit price through numeric keys. Set unit price is showed in the second display, the third display
shows the total price of the goods. To cancel the previous unit price, press C key.
6.7 UNIT PRICE MEMORY
The scale can store 127 sets unit price, 28 with direct key.
6.7.1 SAVE THE UNIT PRICE
DIRECT KEY PLU
To link the unit price to a direct key, hold the desired memory key (
one is asked to enter the PLU name (Article Description) through the A
price is linked to the selected key.
PLU MEMORY
To save the unit price in the PLU memory hold the PLU key for 3 seconds, it will show "SAVE PoS 00" , press
numeric key 0~9 to select which memory location you want to use from 0 to 99. After you do one is asked to enter
the PLU name (Article Description) through the A
scale.
6.7.2 LOAD THE UNIT PRICE
DIRECT KEY PLU
If you want to use the unit price linked to a direct key, press the correspondent desired memory key (
unit price will change to the value stored in the memory.
PLU MEMORY
If you want to use the unit price stored in the scale, press PLU key, the scale will shows "LoAd PoS 00", press
numeric key 0~9 to select which memory location's price you want to use from 0 to 99, current unit price will change
for 3 seconds, after you Key in the unit price;
1~28)
~Z keys, confirm with the TARE key:
confirm with the TARE key: the unit price is stored in the
~Z keys,
10
the unit
current
1~28),