Temporary Ringer Silencing; Quiet Mode - VTech CS6948-3 User Manual

Temporary ringer silencing

When the telephone is ringing, you can
temporarily silence the ringer of the
handset and telephone base without
disconnecting the call. The next call
rings normally at the preset volume.
Press OFF or MUTE on the handset
•
and it displays Ringer muted and
MUTE or CANCEL on the
• P
ress
telephone base. The screen displays
Ringer muted and
NOTES
• ach handset and the base ring when
E
there is an incoming call unless the ringer
volume of that device is turned off.

Quiet mode

You can turn on the quiet mode for a
period of time (1-12 hours). During this
period, all tones (except paging tone)
are muted. When you turn on the quiet
mode, the answering system turns on
automatically.
To set the duration and turn on the
quiet mode:
1. Press and hold
phone is not in use.
The screen displays Quiet: _ _
2.
hours. Use the dialing keys (0-9) to
enter the desired duration (1-12).
3. Press SELECT to save. You hear
a confirmation tone. The screen
displays Quiet mode on and
.
.
when the
.
28
To turn off the quiet mode:
• Press and hold
phone is not in use. The screen
displays Quiet mode off briefly and
then returns to idle.
NOTE
• When you change the settings of the
ringer tone or ringer volume, you can still
hear the samples even if the quiet mode
is on.
when the