Screen Messages - VTech CS6948-3 User Manual

Screen messages

Ans sys
The answering system
is turned off and will
off
not answer calls.
Ans sys on
The answering system
is turned on and will
answer calls.
Base is
The telephone base is
calling calling the handset.
Call log
There are no caller ID
log entries.
empty
Calling The handset is calling
the base (for intercom
base
calls).
The handset is
transferring an outside
call to the base.
Calling
The handset or
HS X telephone base is
calling another handset
(for intercom calls).
The handset or
telephone base
is transferring an
outside call to another
handset.
Check AC
The corded handset
power
is in use while the
telephone base is in
line power mode.
List empty
There are no
phonebook entries.
Memory
The phonebook is full.
full You cannot save any
new entries unless you
delete some.
Ended
You have just ended
a call.
The handset
Failed
registration is not
successful.
HS X is
Another system
calling
handset is calling (for
intercom calls).
Incoming
There is a call coming
call
in.
Intercom
Intercom
ended
Intercom
to
Line in
use
Low
battery
Microphone
on
Muted
New
voicemail
No BAttEry
No line
No message
Not
available
Number
repeated
38
The system device is
on an intercom call.
The intercom call has
just ended.
You have started the
intercom process,
and need to enter the
device number you
wish to call.
An extension phone, or
one of the handsets is
in use.
The handset battery
needs to be recharged.
The mute function
is turned off and the
other party can hear
you.
The microphone is off.
The other party cannot
hear you but you can
hear them.
There are new
voicemail messages
from your telephone
service provider.
The handset in the
handset charger has
no battery installed.
There is no telephone
line connected.
There is no message
recorded in the
answering system.
Someone else is using
the phonebook, caller
ID log or the answering
system.
The telephone number
you have entered
is already in the
phonebook.