Volume; Mute; Join A Call In Progress; Call Waiting - VTech CS6948-3 User Manual

Telephone base speakerphone:
When the corded handset is on a call,
/SPEAKER to switch between
press
the telephone base speakerphone and
the corded handset.
When the speakerphone is active, the
telephone base displays Speaker and
the /SPEAKER light turns on.

Volume

To adjust the listening volume on
a cordless handset:
During a call, press /VOLUME or
•
/VOLUME.
To adjust the listening volume at
the telephone base:
During a call, press
NOTES
• The handset and speakerphone volume
settings are independent.
• When the volume reaches the minimum
or maximum setting, you hear two beeps.

Mute

The mute function allows you to hear
the other party but the other party
cannot hear you.
During a call, press MUTE. The
•
screen displays Muted until the mute
function is turned off.
Press MUTE again to resume the
•
conversation. The screen displays
Microphone on briefly.
VOL or VOL .

Join a call in progress

You can use the telephone base and
a cordless handset, or two cordless
handsets at a time on an outside call.
To join a call with a cordless
handset:
• When a handset or the telephone
base is already on a call, press
on another handset to join the call.
Press OFF or place the handset in
•
the handset charger to exit the call.
The call continues until both devices
hang up.
To join a call with the telephone
base:
• Lift the corded handset or press
/SPEAKER.
• Place the corded handset back to the
telephone base or press
/SPEAKER to exit the call. The call
continues until both devices hang up.

Call waiting

When you subscribe to call waiting
service with your telephone service
provider, you hear an alert tone if there
is an incoming call while you are on
another call.
Press FLASH to put the current call
•
on hold and take the new call.
• Press FLASH at any time to switch
back and forth between calls.
If you also subscribe to caller ID
service, it will let you see the name and
telephone number of the caller during
call waiting.
14
or