Install The Battery; Check The Battery Level; Charge The Battery - VTech CS6948-3 User Manual

Install the battery

Install the battery as shown below.
NOTES
• Use only the battery provided.
• Charge the battery provided with this
product only in accordance with the
instructions and limitations specified in this
manual.
• If the handset will not be used for a long
time, disconnect and remove the battery to
prevent possible leakage.

Check the battery level

After you have installed the battery,
check the battery level on the handset
screen.
If the battery icon is , or , then go
•
to Before use section to set the date
and time, and set the answering
system through voice guide.
• If the screen is blank, or
then the battery needs to be
charged. Go to Charge the battery
section before you do any setting or
operation.

Charge the battery

Place the handset in the handset
charger to charge.
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the table below).
Battery
indicators
The screen The battery
is blank, or has no
shows Put
charge or
in charger
very little
and charge. The
flashes. handset
cannot be
used.
The screen The battery
shows Low has enough
battery and
charge to be
flashes. used for a
short time.
8
flashes,
Battery Action
status
Charge
without
interruption
(at least 30
minutes).
Charge
without
interruption
(at least 30
minutes).