Setting An Alarm - Withings Steel HR Installation And Operating Instructions Manual

Setting an Alarm

Enabling the Alarm
In order to enable and set an alarm, perform the following steps:
1. Open the Withings Health Mate® app.
2. Go to your Timeline.
3. Tap Set your alarm.
If this screen is not displayed, swipe left or right in the top widget (colored part at the top
of the screen) until you find it.
4. Put your Withings Steel HR™ close enough to your mobile device.
5. Tap the Alarm toggle to enable the alarm.
Withings Steel HR™
v1.0 | October, 2016
EN - 30