Oki C823n User Manual page 95

Symptom
There is an The printer is tilted.
abnormal sound.
There is a piece of paper or foreign
object inside the printer.
The output tray is open.
There is a buzzing The printer is printing on the heavy
sound. or thin paper when the temperature
inside is high.
It takes a while to The printer may be cleaning the
start printing. image drum.
The printer is adjusting the
temperature of the fuser unit.
The printer is processing data from
another interface.
A print job has As a result of processing print jobs
stopped in the continuously for a long time, the
middle of the inside the printer has become hot.
printing process. The printer is cooling off.
As a result of processing print jobs
continuously for a long time, the
temperature in the printer inside
has become too high. The printer is
cooling off.
When the print processing is
overloaded by printing with the WSD
port, a computer may stop sending.
Memory is A printer is short on memory
insufficient. because print data is too large.
It takes a long time The processing speed of the
to finish printing. computer may be slowing down the
print job.
You have selected [ProQ/High
Quality] on the [Job Options] tab
of the printer driver.
The print data is complex.
Paper is narrow (less than 230 mm). Change the mode.
The printer driver The printer driver may not be
is not correctly operating correctly.
displayed on Mac
OS X.
Paper is curled. Thin paper is used.
Paper is wet on the Wet paper is used.
edge.
The LED indicator The printer may be malfunctioning.
in the power switch
is blinking at high
speed per about
0.3 seconds.
Point to check
- 95 -
Remedy
Place the printer on a flat surface.
Check the inside of the printer and
remove any objects.
Close the output tray.
This is not a malfunction. You can
proceed with the operation.
Wait for a while.
Wait for a while.
Wait until the process finishes.
Wait for a while.
When the fuser unit becomes cooler,
printing restarts automatically.
Wait for a while.
When the printer becomes cooler,
printing restarts automatically.
Retry to send data on a computer. If
the error is not resolved, use other
network port.
Reduce print data with a printer
driver.
Use a computer with faster
processing speed.
Select [Fine / Detail (600x1200)]
or [Normal (600x600)] on the
[Job Options] tab of the printer
driver.
Make the data simpler.
Uninstall the printer driver and install
it again.
Set an appropriate paper weight or
select [High Humid Mode].
Select [High Humid Mode].
Unplug the AC cord immediately.
Other Issues
Reference
-
-
-
-
-
3
-
-
-
-
-
Advanced
-
-
-
Advanced
Advanced
Advanced
Advanced
-