Connecting; Wiring And Block Diagram - Siemens Simatic ET 200SP Manual

Connecting

3.1

Wiring and block diagram

This section includes the block diagram of the module with the AQ 2xU/I HS pin assignments
for a 2-wire, 3-wire and 4-wire connection for voltage output.
The 3-wire and 4-wire connection are used for the compensation of the voltage drop on the
connection cables.
You can find information on wiring the BaseUnit in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Note
You may use and combine the different wiring options for all channels.
Note
The load group of the module must begin with a light-colored BaseUnit. Keep this in mind
also during the configuration.
14
Analog output module AQ 2xU/I HS (6ES7135-6HB00-0DA1)
Manual, 09/2016, A5E03576140-AD
3