Switching Diseqc On And Off - TechniSat DIGITY 1 Operating Manual

type of LNB, then you must adjust the receiver as follows :
Press the Menu, key in order to display the Main menu.
>
Use the arrow up/down keys to mark the line Settings.
>
Confirm by pressing OK.
>
The menu Settings will be displayed.
Now mark the line LNB Settings by means of the arrow up/down keys.
>
Confirm by pressing OK.
>
The menu LNB Settings will be displayed.
The following adjustments can be made in this sub-menu:
5.4.1 Switch DiSEqC on or off
DiSEqC (Digital Satellite Equipment Control) is a digital control signal used to control and
switch DiSEqC-compatible components via the antenna cable.
If your external unit is equipped with DiSEqC components, you must switch on the DiSEqC-
control:
13