TechniSat DIGITY 1 Operating Manual page 34

Table of Contents

Advertisement

Memory capacity:
FLASH memory
SDRAM (CPU)
SDRAM (CPU)
EEPROM
Audio Parameters:
Input analogue:
Input levels L/R
Input impedance
Output analogue:
Output levelsl L/R
Output impedance
THD
Crossover
Initial volume
Video Parameters:
Input:
Input level FBAS
Input level RED
Input level GREEN
Input level BLUE
Video/Tele text
Tele text filtering
Reading in tele text files
TV-SCART:
Output:
switchable FBAS or RGB r
VCR-SCART:
Eingang:
Output:
FBAS
Serial Interface RS 232:
Type
Bitrate
Connecting plug
Function
LNB Power supply:
LNB current
LNB voltage vertical
LNB voltage horizontal
22 kHz-Modulation:
Programme memory/Satellite positions:
500 TV programmes
500 RADIO programmes
0,5Mbytes
2 MBytes
2 MBytes
1 kByte
0,5 V r.m.s. (nominal)
> 40 kOhm
0,5 V r.m.s. (nominal)
600 Ohm
> 60 dB (1 kHz)
< - 65 dB
Memorizes last set value
1 Vs-s +/- 0.3 dB into 1 kOhm
0,7 Vs-s +/- 0.1Vp-p into 75 Ohm
0,7 Vs-s +/- 0.1Vp-p into 75 Ohm
0,7 Vs-s +/- 0.1Vp-p into 75 Ohm
corresponding to ETS 300 472 standard
(FBAS) corresponding to ITU-R BT.653-2 lines: 6-22 and 320-335
FBAS oder RGB
RS 232, bi-directional
38,4 kBit/s
D-SUB 9 pin plug
Updating of operational software
400 mA max.; double insulated
<14,0V no load, > 11,5 V at 400 mA
< 20V no load, > 17,2 V at 400 mA
LNB switched off in standby mode
22 kHz, amplitude 0.6 V +/- 0.2 V
34

Advertisement

Table of Contents
loading

Table of Contents