Digicom pocket GSM User Manual page 30

PocketGSM
<parity>
0
1
2
3
4
Examples
AT+ICF=3,4 Data: 8bit;
AT+ICF=5,0 Data: 7bit;
AT+ICF=5,1 Data: 7bit;
AT+IFC Flow control
This command is used to set the flow control to be used.
For further information on the AT+IFC command, see the chapter "Functional Examples".
Command
AT+IFC=0,0
AT+IFC=2,2
AT+IFC?
AT+IFC=?
Default: AT+IFC=2,2
AT+ILRR Interface speed report
This command gives a report for the serial port speed, before the connection message.
Command
AT+ILRR=0
AT+ILRR=1
AT+ILRR?
AT+ILRR=?
Default: AT+ILRR=0
Parity Format
Odd
Even
Mark
Space
None
Parity: None;
Parity: Odd;
Parity: Even;
Possible answers
OK
OK
+IFC: 2,2
+IFC: (0,2), (0,2)
Possible answers
OK
OK
+ILRR: 0
+ILRR: (0,1)
4.10
Stop: 1bit
Stop: 1bit
Stop: 1bit
Action
Flow control disabled
Enables the Hardware flow control (RTS/CTS)
Shows the current flow control
Shows the available values
Action
Report disabled
Report enabled
Shows the current settings
Shows the available settings
AT Commands