Digicom pocket GSM User Manual page 20

PocketGSM
Through the AT+CNMI command it is possible to program the PocketGSM so as it sends
immediately the received message to the DTE (eg. PC):
Command: AT+CNMI=2,2
Answer: OK
With this configuration PocketGSM sends immediately the message to the DTE, when it
receives it from the network:
+CMT: "+393217654321",,"01/01/75,12:06:14+00"
First SMS message with Pocket GSM
Cancel the SMS
For example, to cancel the second message:
Command: AT+CMGD=2
Answer: OK
[ For further information see the chapter "AT Commands" present in the user's manual on Digicom
website ]
3.8
Functional Examples