Digicom pocket GSM User Manual page 19

PocketGSM
Text: First SMS message with Pocket GSM<ctrl z>
Answer: +CMGS: <sms index>
OK
After you digit yuor message, press <ctrl z> (Hex =1A).
In this example the message "First SMS message with Pocket GSM" is sent to number
+393217654321.
Attention In case of error after you send the SMS, check the identifier of the Services Center with your
Telephone Operator.
Read the SMS (TEXT mode)
The factory configuration of PocketGSM detects the coming of a new SMS. When an
SMS arrives, PocketGSM send to the DTE (eg. PC) the following message: +CMTI: "SM",2
(2 indicates the memory location of the SIM card where the SMS has been stored). To
read the message use the AT+CMGR command:
Command: AT+CMGR=2
Answer: +CMGL: 2,"REC UNREAD","+393217654321",,"01/01/75,12:05:46+04"
Second SMS message with PocketGSM
To display all the messages present in the SIM memory:
Command: AT+CMGL="ALL"
Answer: +CMGL: 1,"REC READ","+393217654321",,"01/01/75,12:05:46+04"
First SMS message with Pocket
+CMGL: 2,"REC UNREAD","+393217654321",,"01/01/75,12:06:26+04"
Second SMS message with PocketGSM
OK
3.7
Functional Examples