4.
Install the new cartridge by pushing the cartridge in as far as you can and then
letting go.
5. Close the cover. The printer will prime the new ink cartridge(s) and then continue
to print if it was in the middle of a print job.
D: Alignment Print
An alignment print is necessary after every 5,000 prints an after a printhead change. In
those cases, you will be prompted by the software to run and alignment print.
You may also manually run an alignment print to improve print quality. Follow these
instructions:
1. Open Brady Status J5000. Click on the Cartridge Tab (Second Tab). Click the Align
Printhead button.
2. Tear off any printed labels. Click Next.
J5000 Operator's Guide, Rev. 1.53
15