A: Monitoring Ink Levels - Brady BradyJet J5000 Operator's Manual

A: Monitoring Ink Levels

Ink levels can be monitored at any time by using the Brady Status J5000. Immediately
after printing starts the Brady Status J5000 will display the ink levels in the lower right
corner of your screen.
The print status will also be displayed on the top bar.
In the Ready mode, the ink percentages and printhead life will be displayed, along with
three tabs. The tabs will only be displayed if the printer is Ready (not printing).
Note:
If you are using multiple printers, you can switch between them using the drop
down arrow at the top of the Brady Status J5000. The title of each will correspond to the
printer name as shown in Devices and Printers.
J5000 Operator's Guide, Rev. 1.53 12