Brady BradyJet J5000 Operator's Manual page 17

4.
Click on the Output/Cut Mode button.
There are different options available which change if the cutter is enabled or disabled. If
the cutter is disabled, the label present options will be available. If the cutter is enabled
the present options are no longer available but cut options become available.
Cutter Options:
Cut after no activity - This setting will cut at the end of a print job if the printer does not
receive another print job within one second of the last print job in the queue. You can
use this feature to cut at the end of multi-copy job, multi-page job or multiple individual
jobs in the queue.
Cut after specified number of labels - This option will cut after the number of labels
specified in the "Cut/Present After___ Labels" setting above. Change the value and then
click "Set" to send it to the printer. The quantity will change on the setting to reflect the
change.
Cut every label - This setting will cut after every label.
Cut after button press - This setting will cut after you press the Load/Feed button on the
printer. This can be used after one label or an entire job. This feature is useful if you
will not be present at the end of the print to catch the cut label.
Present Options:
J5000 Operator's Guide, Rev. 1.53 9