Configuring Caller Id Blocking; Blocking Anonymous Calls - Cisco 7940 User Manual

Step 6: Press the Save softkey to save your selection of this feature and displays the Settings
menu.
Step 7: Press the Back softkey to display the main LCD screen. A Do not disturb message is
displayed on the LCD screen.
Note: When Do not disturb is enabled, a Do not disturb message is displayed on the LCD
screen You can disable Do not disturb by pressing the DND softkey or by performing the
preceding steps and press the No softkey.

Configuring Caller ID Blocking

You can configure your phone to have your phone number or e-mail address blocked from
phones with caller identification capabilities by using the Caller ID Blocking feature.
Perform the following steps to configure the Caller ID Blocking feature.
Step 1: Press the settings button.
Step 2: Press the Scroll key to highlight Call Preferences.
Step 3: Press the Select softkey.
Step 4: Press the Scroll key to highlight CallerID Blocking from the Call Preferences menu.
Step 5: To enable the CallerID Blocking feature, press the Yes softkey. To disable the feature,
press the No softkey.
Step 6: Press the Save softkey to save your selection of this feature and display the Settings
menu.
Step 7: Press the Back softkey to display the main LCD screen.

Blocking Anonymous Calls

You can block all anonymous calls using the Anonymous Call Block feature.
Perform the following steps to configure the Anonymous Call Block feature.
Step 1: Press the settings button.
Step 2: Press the Scroll key to highlight Call Preferences.
Step 3: Press the Select softkey.
Step 4: Press the Scroll key to highlight Anonymous Call Block from the Call Preferences menu.
Hostcomm Hosted Telephony
15
Using the Cisco IP Phone 7940/7960
User Guide