Indirect construction heater 800,000 btu/h (38 pages)
Summary of Contents for Sure Flame S1505B
Page 1
S1505B CONSTRUCTION HEATER Rev. 4.32 Aug 29, 2014 SERVICE AND MAINTENANCE MANUAL No. 974-9308 PLEASE RETAIN FOR FUTURE REFERENCE PRODUCTS A DIVISION OF HAUL-ALL EQUIPMENT LTD. 4115 - 18 Ave. N, Lethbridge, Alberta www.sureflame.com...
Page 2
WARNING Not for home or recreational vehicle use Page 2 S1505B Manual 974-9308 Rev. 4.32; Aug 29 2014...
Page 3
THORITY IF YOU HAVE QUESTIONS ABOUT LOCAL REGU- LATIONS. Other standards govern the use of fuel gases and heat produc- ing products in specific applications. Your local authority can advise you about these. S1505B Manual 974-9308 Rev. 4.32; Aug 29 2014 Page 3...
Installation The Sure Flame Model S1505B is a direct fired gas heater intended to be used primarily for the temporary heating of buildings under construction, alteration, or repair. Since all the products of combustion are released into the area being heated, it is imperative that adequate ventilation is provided.
The installation of this heater to a natural gas supply must conform with all applicable local codes or, in the absence of local codes, with the National Fuel Gas Code ANSI Z223.1/NFPA 54. S1505B Manual 974-9308 Rev. 4.32; Aug 29 2014 Page 7...
Requirements for Temporary and Portable Space Heating Devices and Equipment Used in the Construction Industry. THE INSTALLATION AND MAINTENANCE OF THE HEATER MUST BE ACCOMPLISHED BY A QUALIFIED SERVICE PERSON. Page 8 S1505B Manual 974-9308 Rev. 4.32; Aug 29 2014...
Safety Controls Servicing of Sure Flame Construction Heaters normally involves one of several built-in safety features. The Model S1505B incorporates devices to detect the following: 1 LOSS OF FLAME Gas supply is shut off if flame is lost to prevent raw gas from leaving the heater.
Sure Flame Heaters are designed to have a low skin temperature. This provides added safety in the workplace. DURABLE CONSTRUCTION The Model S1505B uses a stainless steel burner for long life and consistent performance. In order to maintain the highly efficient combustion of the Sure Flame Heater, the combustion chamber must remain as manufactured.
Preventive Maintenance Sure Flame Construction Heaters are built to withstand the rigours of operating on construction sites, mining applications, and a multitude of other locations where heaters are used. To maintain the reliable performance it is necessary to perform regular maintenance.
Chart C – Heater does not start, fan starts, spark, no flame Chart D – Heater starts, flame lights but goes out after a few seconds Chart E – Heater starts, but fails during operation Chart F – Other problems Page 12 S1505B Manual 974-9308 Rev. 4.32; Aug 29 2014...
Thermostat Jumper WHITE BLACK BLUE 1- BLACK 4 - WHITE 120VAC STAGE I I 2 - BLUE 3 - BROWN NEUTRAL STAGE I BROWN FRONT VIEW Thermostat Cable Plug Page 24 S1505B Manual 974-9308 Rev. 4.32; Aug 29 2014...
Need help?
Do you have a question about the S1505B and is the answer not in the manual?
Questions and answers