DAITEM SH602AX Installation Manual

SJ608AX
SH602AX SJ604AX
Contents
1. Introduction.................................... ................................. 1
2. Preparation..................................... ................................. 2
3. Recognition programming with a TwinBand
alarm control panel ................................ ........................ 3
4. Parameter-setting (TwinBand
4.1 Setting a command number ....................... ............... 3
4.2 Setting a key to Arm or Disarm groups 1 to 8 ... ....... 4
5. Radio link between the remote control keyfob
and an Optwin ® wireless product................................. 5
5.1 Creating and deleting the radio link
between the remote control keyfob
and an Optwin ® wireless product............................... 5
5.2 Deleting the radio links of a key
on the remote control keyfob....................... .............. 5
Recommendations
The user must not attempt to access the device's in ternal parts, except areas described in this manual . If the user does
access these parts, the product guarantee will be c onsidered null and void and DAITEM shall not be hel d responsible for any
problems. Touching the device's internal parts and/ or electronic components can damage the product. Furthermore, the
device is designed in such a way that these parts a nd components do not need to be accessed for operation or
maintenance purposes.

1. Introduction

IMPORTANT
• Some functions are only available with control pa
panel keypad to check the version).
• Operational differences in relation to former ran
section at www.daitem.co.uk
The remote control devices SJ604AX and SJ608AX comb ine two radio protocols (TwinBand
control several product ranges.
The remote control device SH602AX operates only on
radio protocol.
• The keyfob can be used to control:
- the intrusion protection function of the alarm sy stem hence ensuring the protection of individuals
- latch/gate access points using the wireless doorp hone system (Optwin
- comfort applications with external receivers or t he remote-controlled socket (TwinBand
The keys can be personalised to adapt the commands
• Factory configuration of remote control keyfobs
The SJ608AX keyfob has a cursor (top and bottom pos ition) so that commands on each key can be doubled
providing up to 8 functions.
The commands allocated to keys are identical whatev er the position of the cursor (top or bottom).
2 function remote keyfob with information feedback
SH602AX:
bi-protocol 4 function remote keyfob
SJ604AX:
with information feedback
8 function 4 key remote keyfob
SJ608AX:
with information feedback
INSTALLATION MANUAL
®
® radio) .......................... 3
nel versions 2.0.0 or later (enter
ges are described in the compatibility booklet avai
.
the TwinBand
6. Locking the remote control keyfob via a code....
6.1 Procedure for locking or unlocking the keyfob .. ....... 6
6.2 Personalising the locking code ................. ................. 6
7. Three-colour LED operation...................... ................... 6
7.1 Information feedback........................... ....................... 6
7.2 Confirmation of receipt......................... ...................... 7
7.3 Protected or locked keys ....................... .................... 7
7.4 Remote control battery fault ................... ................... 7
8. Maintenance ..................................... .............................. 7
8.1 Changing the battery........................... ....................... 7
8.2 Returning to the factory configuration.......... ............. 8
9. Technical data.................................. ............................... 8
® radio protocol, it does not operate on the Optwin
® ), except for the SH602AX,
to the user's habits.
on the control
lable in the Daitem Installers
® and Optwin ® ) allowing them to
(TwinBand ® radio),
® and Optwin ® .)
hence
...... 6
®