How To Test Fm-8900S From A Remote Handset; How To Display The Program Versions; Squelch - Furuno FM-8900S Operator's Manual

6. REMOTE HANDSET
6.12

How to Test FM-8900S from a Remote Handset

1. Press the MENU key to open the [MENU] screen.
2. Press the  or  key to select [DAILY TEST] then press
the ENTER key.
3. Press the ENTER key to start the test. You can confirm the test results for FM-
8900S with the 1 or 3 key.
Press the 3 key for the next page and the 1 key for the previous page.
6.13

How to Display the Program Versions

1. Press the MENU key to open the [MENU] screen.
2. Press the  or  key to select [VERSION] then press the ENTER key. The pro-
gram versions for FM-8900S and HS-8900 appear.
6.14

Squelch

• The squelch value is common to all remote handsets. If you change a squelch value
for a remote handset, squelch values for all other remote handsets are changed ac-
cordingly.
• You can not change a squelch value for a remote handset while the squelch is being
adjusted by another remote handset.
• When the DW or scan is active, the squelch value from the terminal (transceiver unit
or remote handset) that initiated the DW or scan is used.
6-8
These items are displayed
only when own ship's
MMSI is registered.
This item is not displayed when
there is no alarm unit.