Tx Message Preparation; List For Message Files - Furuno FM-8900S Operator's Manual

5. MENU OPERATION
5.14

TX Message Preparation

For the individual, PSTN, group and test messages, you can create messages and
store them in the memory for future use. You can edit, send or delete these messages.
A maximum of 100 messages can be stored in the memory.
5.14.1

List for message files

1. Rotate the CHANNEL/ENTER knob to select [DSC] on the [MENU] screen then
push the knob.
2. Rotate the CHANNEL/ENTER knob to select [MSG FILE] then push the knob.
Key/knob
CHANNEL/
ENTER
CANCEL
OTHER
DSC MSG
1
3
4
5
6
Detailed information screen for message files
Rotate the CHANNEL/ENTER
knob to select the message file
desired on the [MESSAGE
FILE] list then push the knob.
The detailed information screen
for the selected message file
appears. The right figure shows
the screen for an individual
message.
5-12
• Move the cursor by rotating the CHANNEL/ENTER knob.
• Open the detailed information screen for the selected message file by
pushing the CHANNEL/ENTER knob (see the following "Detailed in-
formation screen for message files").
Return to the [MENU] screen.
Open the [COMPOSE MESSAGE] screen to create a DSC message with
registered message (see paragraph 5.13.5).
Go to the previous page.
Go to the next page.
Delete messages (see paragraph 5.14.8).
Open the [MESSAGE FILE ENTRY] screen.
Switch the message type. Each press changes the type continuously
([INDIVIDUAL]  [GROUP]  [PSTN]  [TEST]  [INDIVIDUAL]  ...).
When 100 messages
have been registered,
this is grayed out.
Function