Button Led - Samsung OfficeServ ITP-5021D User Manual

THINGS YOU SHOULD KNOW

8. Button LED

The [Transfer] button, [Hold] button, and [Speaker] button have a LED that turns on or off
according to the phone status.
For incoming external calls or intercom calls ringing at your IP Phone the trunk button LED
or Call button LED will flash green. The trunk button LED will flash red on other IP Phones
with the same trunk button. While holding a call, the green LED of the trunk line will blink.
In the following table, the functions of LEDs are summarized.
Trunk line or functions are in use
New call is ringing
While a call is on hold
A call recalling to the IP Phone
Page 30
Transfer
Functions
Speaker
Hold
Button LED Status
LED is steady green.
LED is a fast flashing green.
LED is a slow flashing green or red.
LED is a slow flashing yellow.
© SAMSUNG Electronics Co., Ltd.